design and speci cations are each subject to change without notice. ask factory for the current technical speci cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. fixed inductors (chip inductors) 1234567891011 shape size : mm (inch) product code inductance packaging design no. taping inductance tolerance & - + 3 ' / + ' # f chip inductors rf re 1005 (0402) 1608 (0603) 1.5 nh 10 nh 220 nh 1n5 10n r22 0.2 nh 0.3 nh 2 % 5 % z d g j 1234567891011 chip inductors high frequency use (non magnetic core) type: eljrf eljre features ? high frequency capability due to its non magnetic core. ? capable of being re-? ow or ? ow soldered. ? unique ceramic core/laser-cut technology. ? non polarity product. ? good for mounting. ? rohs compliant recommended applications ? rf circuitry for cellular phones and wireless communication equipment. explanation of part numbers storage conditions ? package : normal temperature (C5 to 35 c), normal humidity (85 %rh max.), shall not be exposed to direct sunlight and harmful gases and care should be taken so as not to cause dew. ? operating temperature : C40 to +85 c storage period ? solderability may be reduced due to the conditions of high temperature and high humidity which causes the oxidation of tin-plated terminals. even if storage conditions are wi thin speci? ed limits, solderability may be reduced with the passage of time. therefore, please control the storage condit ions and try to use the product within 6 months of receipt. packaging methods, soldering conditions and safety precautions please see data files. nov. 2013 02 2
design and speci cations are each subject to change without notice. ask factory for the current technical speci cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. fixed inductors (chip inductors) 0.20.1 0.20.1 1.00.05 0.50.05 0.50.05 0.5 to 0.6 1.5 to 1.7 0.5 to 0.6 rf type 1005 (0402) dimensions in mm (not to scale) recommended land pattern in mm (not to scale) part no. inductance q srf ? 1 (mhz) min. r dc ? 2 ( ) max. dc current (ma) max. (nh) tolerance (%) test freq. (m hz) min. test freq. (m hz) eljrf1n0 fb 1.0 d : 0.3 nh z : 0.2 nh 100 8 100 6000 0.05 400 eljrf1n2 fb 1.2 6000 0.06 400 eljrf1n5 fb 1.5 6000 0.07 400 eljrf1n8 fb 1.8 6000 0.08 400 eljrf2n2 fb 2.2 6000 0.09 400 eljrf2n7 fb 2.7 5500 0.10 400 eljrf3n3 fb 3.3 5500 0.12 400 eljrf3n9 fb 3.9 5200 0.15 360 eljrf4n7 fb 4.7 4800 0.17 360 eljrf5n6 fb 5.6 4600 0.19 340 eljrf6n8 fb 6.8 j : 5 % 4000 0.30 320 eljrf8n2 fb 8.2 3500 0.35 320 eljrf10n fb 10 g : 2 % 2800 0.41 320 eljrf12n fb 12 2800 0.45 320 eljrf15n fb 15 2500 0.60 240 eljrf18n fb 18 2200 0.70 240 eljrf22n fb 22 2000 0.80 200 eljrf27n fb 27 1800 1.20 200 eljrf33n fb 33 1800 1.40 170 eljrf39n fb 39 1800 1.70 150 eljrf47n fb 47 1800 2.10 140 eljrf56n fb 56 1500 2.50 130 eljrf68n fb 68 1500 4.00 120 eljrf82n fb 82 1400 4.50 110 eljrfr10 fb 100 1200 5.50 90 part no. inductance q srf ? 1 (mhz) min. r dc ? 2 ( ) max. dc current (ma) max. (nh) tolerance (%) test freq. (m hz) min. test freq. (m hz) eljrf2n0 fb 2.0 d : 0.3 nh z : 0.2 nh 100 8 100 6000 0.08 400 eljrf2n4 fb 2.4 6000 0.09 400 eljrf3n0 fb 3.0 5500 0.11 400 eljrf3n6 fb 3.6 5300 0.14 380 eljrf4n3 fb 4.3 5000 0.16 360 eljrf5n1 fb 5.1 4700 0.18 350 eljrf6n2 fb 6.2 4300 0.25 330 eljrf7n5 fb 7.5 j : 5 % 3700 0.33 320 eljrf9n1 fb 9.1 3100 0.38 320 eljrf11n fb 11 g : 2 % 2800 0.43 320 eljrf13n fb 13 2600 0.53 280 eljrf16n fb 16 2300 0.65 240 eljrf20n fb 20 2100 0.75 220 eljrf24n fb 24 1900 1.00 200 eljrf30n fb 30 1800 1.30 190 eljrf36n fb 36 1800 1.60 160 eljrf43n fb 43 1800 1.90 150 standard parts (e24 series) standard parts (e12 series) : symbol of tolerance ? 1 : s elf resonant frequency ? 2 : dc resistance ? 1 : self resonant frequency ? 2 : dc resistance : symbol of tolerance standard packing quantity 10000 pcs./reel nov. 2013 02 3
design and speci cations are each subject to change without notice. ask factory for the current technical speci cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. fixed inductors (chip inductors) 1 10 100 1000 10 100 1000 10000 10 20 30 40 50 60 70 80 10 100 1000 10000 1n0 2n2 22n 10n 47n r10 2n2 4n7 10n 22n 47n r10 frequency (mhz) frequency (mhz) inductance (nh) q typical characteristics q-frequency characteristics (typ.) l-frequency characteristics (typ.) part no inductance (nh)(typ.) q(typ.) 800mhz 900mhz 1.8ghz 2.0ghz 2.4ghz 800mhz 900mhz 1.8ghz 2.0ghz 2.4ghz eljrf1n0 fb 0.95 0.95 0.96 0.96 0.97 31.8 33.8 47.2 49.6 54.0 eljrf1n2 fb 1.23 1.24 1.24 1.25 1.25 31.0 33.0 43.4 45.6 49.7 eljrf1n5 fb 1.51 1.51 1.53 1.53 1.54 32.9 34.9 48.6 50.9 55.4 eljrf1n8 fb 1.85 1.85 1.87 1.88 1.90 31.1 33.1 45.9 48.1 52.1 eljrf2n2 fb 2.11 2.12 2.15 2.16 2.19 28.3 30.1 41.6 43.6 47.2 eljrf2n7 fb 2.63 2.63 2.68 2.70 2.73 28.0 28.7 39.6 41.4 44.7 eljrf3n3 fb 3.27 3.28 3.35 3.37 3.42 29.9 31.7 43.7 45.7 49.2 eljrf3n9 fb 3.73 3.74 3.82 3.85 3.91 29.7 31.5 43.4 45.4 48.8 eljrf4n7 fb 4.77 4.78 4.92 4.96 5.07 33.9 35.9 49.0 51.1 54.6 eljrf5n6 fb 5.70 5.70 5.80 5.90 6.20 30.0 31.0 40.0 41.0 42.8 eljrf6n8 fb 6.91 6.93 7.21 7.29 7.51 28.9 30.7 41.3 42.7 45.0 eljrf8n2 fb 8.31 8.33 8.73 8.86 9.19 31.0 32.9 43.9 45.3 47.4 eljrf10n fb 10.21 10.25 10.77 10.94 11.37 29.8 31.6 42.1 43.5 45.6 eljrf12n fb 12.3 12.3 13.1 13.3 14.0 30.8 32.6 42.9 44.1 45.4 eljrf15n fb 15.3 15.4 16.5 16.9 17.9 28.8 30.4 39.5 40.4 41.2 eljrf18n fb 18.4 18.6 20.2 20.8 22.3 31.1 32.8 41.6 42.1 41.7 eljrf22n fb 23.7 23.9 27.5 28.8 32.5 31.3 32.9 39.6 39.4 37.2 eljrf27n fb 28.3 28.5 32.8 34.4 38.8 28.4 29.9 36.0 35.8 33.7 eljrf33n fb 34.6 35.1 43.4 46.8 57.5 28.4 29.7 33.7 32.9 29.2 eljrf39n fb 40.8 41.4 49.9 53.2 63.3 25.6 26.9 31.1 30.5 27.5 eljrf47n fb 49.6 50.3 62.1 66.8 81.8 22.7 23.8 26.9 26.2 23.2 eljrf56n fb 58.4 59.1 69.9 74.1 86.2 23.8 25.0 28.9 28.3 25.6 eljrf68n fb 71.9 72.9 90.4 97.5 119.9 22.3 23.3 25.4 24.3 20.4 eljrf82n fb 86.6 87.8 107.8 115.7 140.6 21.9 22.9 25.5 24.6 21.3 eljrfr10 fb 105.5 106.8 128.2 136.5 161.3 21.0 21.9 25.0 24.4 21.9 : symbol of tolerance reference date eljrf type nov. 2013 02 4
design and speci cations are each subject to change without notice. ask factory for the current technical speci cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. fixed inductors (chip inductors) 0.8 to 0.9 2.0 to 2.6 0.8 to 1.0 1.6 0.8 0.8 0.3 0.3 re type 1608 (0603) recommended land pattern in mm (not to scale) dimensions in mm (not to scale) standard packing quantity 3000 pcs./reel part no. inductance q srf ? 1 (mhz) min. r dc ? 2 ( ) max. dc current (ma) max. (nh) tolerance (%) test freq. (m hz) min. test freq. (m hz) eljre1n0 fa 1.0 d : 0.3 nh z : 0.2 nh 100 7 100 6000 0.05 500 eljre1n2 fa 1.2 6000 0.06 500 eljre1n5 fa 1.5 8 6000 0.07 500 eljre1n8 fa 1.8 6000 0.08 500 eljre2n2 fa 2.2 6000 0.09 500 eljre2n7 fa 2.7 6000 0.10 500 eljre3n3 fa 3.3 9 5500 0.12 500 eljre3n9 fa 3.9 j : 5 % 5500 0.15 450 eljre4n7 fa 4.7 4800 0.17 450 eljre5n6 fa 5.6 4600 0.18 430 eljre6n8 fa 6.8 3550 0.20 430 eljre8n2 fa 8.2 3500 0.28 400 eljre10n fa 10 g : 2 % 10 2800 0.32 400 eljre12n fa 12 2800 0.35 400 eljre15n fa 15 2500 0.41 350 eljre18n fa 18 2300 0.45 350 eljre22n fa 22 2000 0.50 300 eljre27n fa 27 2000 0.55 300 eljre33n fa 33 1800 0.60 300 eljre39n fa 39 11 1800 0.80 300 eljre47n fa 47 1800 0.95 250 eljre56n fa 56 12 1800 1.20 250 eljre68n fa 68 1500 1.30 250 eljre82n fa 82 1500 1.50 250 eljrer10 fa 100 1300 1.80 200 eljrer12 fa 120 25.2 5 25.2 1200 3.00 130 eljrer15f a 150 1100 4.50 100 eljrer18 fa 180 4 1000 6.50 80 eljrer22 fa 220 900 7.50 70 standard parts (e12 series) ? 1 : self resonant frequency ? 2 : dc resistance : symbol of tolerance no v. 2013 02 5
design and speci cations are each subject to change without notice. ask factory for the current technical speci cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. fixed inductors (chip inductors) 1 10 100 1000 10 100 1000 10000 20 40 60 80 100 120 10 100 1000 10000 2n2 10n 22n 47n r22 r10 4n7 2n2 r22 r10 47n 22n frequency (mhz) frequency (mhz) inductance (nh) q typical characteristics q-frequency characteristics (typ.) l-frequency characteristics (typ.) part no inductance (nh)(typ.) q(typ.) 800mhz 900mhz 1.8ghz 2.0ghz 2.4ghz 800mhz 900mhz 1.8ghz 2.0ghz 2.4ghz eljre1n0 fa 1.01 1.01 0.99 0.98 0.98 71.2 76.8 116.8 129.6 155.8 eljre1n2 fa 1.19 1.19 1.18 1.17 1.17 65.1 69.8 102.7 113.9 136.9 eljre1n5 fa 1.41 1.41 1.39 1.39 1.38 52.7 56.2 79.6 88.0 103.3 eljre1n8 fa 1.86 1.86 1.84 1.84 1.84 55.9 59.6 86.7 97.5 117.0 eljre2n2 fa 2.10 2.09 2.07 2.07 2.07 48.6 51.3 74.8 83.6 98.6 eljre2n7 fa 2.59 2.59 2.58 2.59 2.60 48.6 51.3 71.1 78.1 89.9 eljre3n3 fa 3.09 3.08 3.08 3.09 3.11 49.6 52.7 78.5 88.6 105.8 eljre3n9 fa 3.61 3.61 3.63 3.65 3.69 50.2 53.0 70.5 77.1 87.0 eljre4n7 fa 4.42 4.42 4.48 4.52 4.60 46.3 49.4 69.4 76.6 86.1 eljre5n6 fa 5.39 5.39 5.49 5.55 5.66 49.5 52.8 75.4 84.0 94.3 eljre6n8 fa 6.59 6.60 6.79 6.89 7.08 49.3 52.8 78.1 86.7 97.0 eljre8n2 fa 7.97 7.99 8.33 8.51 8.83 49.0 52.4 75.4 82.6 89.1 eljre10n fa 9.60 9.63 10.22 10.51 11.07 44.2 47.0 63.4 68.0 69.7 eljre12n fa 11.7 11.8 12.7 13.2 14.1 44.6 47.7 64.7 68.5 67.8 eljre15n fa 14.6 14.6 16.2 17.1 18.7 42.4 45.4 58.4 59.5 56.9 eljre18n fa 17.6 17.8 20.2 21.5 24.2 45.9 49.4 64.6 65.0 58.8 eljre22n fa 21.7 21.9 26.0 28.3 33.3 43.0 45.8 54.2 52.2 43.8 eljre27n fa 27.2 27.6 34.6 38.9 49.3 43.9 47.0 52.4 49.2 38.1 eljre33n fa 33.3 33.9 45.5 53.2 75.2 41.8 44.4 45.2 39.3 26.2 eljre39n fa 39.8 40.7 58.6 71.9 117.0 42.2 44.9 40.4 33.1 18.8 eljre47n fa 48.3 49.6 79.8 107.1 260.7 42.6 45.3 34.1 24.0 8.8 eljre56n fa 59.2 61.1 112.8 176.3 735.5 42.0 44.5 25.1 15.2 0.8 eljre68n fa 73.9 77.0 185.9 459.7 41.8 44.0 21.5 9.5 eljre82n fa 94.0 99.6 494.3 39.7 41.5 7.7 eljrer10 fa 115.2 123.5 2141.2 35.3 36.7 1.6 eljrer12 fa 143.4 156.9 35.2 35.7 eljrer15 fa 188.5 210.6 40.6 41.5 eljrer18 fa 242.9 280.4 39.0 39.8 eljrer22 fa 337.9 416.6 43.2 45.3 reference date eljre type : symbol of tolerance nov. 2013 02 6
design and speci cations are each subject to change without notice. ask factory for the current technical speci cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. fixed inductors (chip inductors) t 1 t 2 p 0 e f w a p 1 p 2 f d 1 f d 0 b tape running direction chip component t 2 t 1 part p 0 f w e fd 0 p 1 p 2 a tape running direction b e c d a b w taping reel dimensions in mm (not to scale) punched carrier tape dimensions in mm (not to scale) type f abwefp 1 rf, qf, pf 0.71 1.21 8.0 1.75 3.5 2.0 p 2 p 0 0 d 0 t 1 t 2 rf, qf, pf 2.0 4.0 0 1.5 0.7 max. 1.0 max. packaging methods (taping) type e abwefp 1 re, qe, pe 1.0 1.8 8.0 1.75 3.5 4.0 p 2 p 0 0 d 0 0 d 1 t 1 t 2 re, qe, pe 2.0 4.0 0 1.5 0 0.6 (0.27) 1.2 parts types abcdew rf, qf, pf re, qe, pe 180 60 13 21 2 9 quantity types quantity rf, qf, pf 10000 pcs. re, qe, pe 3000 pcs. standard packing quantity/reel ? under conditions of high temperature and humidity deterioration of the taping and packaging may be accelerated. please carefully control storage conditions and use the product within 6 months of receipt. embossed carrier tape dimensions in mm (not to scale) nov. 2013 04 1 4
design and speci cations are each subject to change without notice. ask factory for the current technical speci cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. fixed inductors (chip inductors) t2 temperature (c) time t3 t2 t1 t1 0 soldering conditions refl ow soldering conditions pb free solder recommended temperature profi le flow soldering conditions preheat: 130 to 150 c, 60 to 180 s, soldering: 260 c, 5 s max. notes solderability may be reduced due to the conditions of high temperature and high humidity which causes the oxidation of tin-plated terminals. even if storage conditions are within specified limits, solderability may be reduced with the passage of time. therefore, please control the storage conditions and try to use the product within 6 months of receipt. in case the product has been stored for a period longer than 6 months, use the product only after con? rmation of its solderability. type preheat soldering peak temperature time of re? ow t1 [c] t1 [s] t2 [c] t2 [s] t3 t3 limit f 150 to 180 60 to 120 230 c 40 max. 250 c, 10 s 260 c, 10 s 2 times max. e 150 to 180 60 to 120 230 c 40 max. 250 c, 10 s 260 c, 10 s 2 times max. nov. 2013 04 1 5
design and speci cations are each subject to change without notice. ask factory for the current technical speci cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. fixed inductors (chip inductors) precautions for use 1. operation range and environments 1 these products are designed and manufactured for general and stan dard use in general elec tron ic equipment (e.g. av equipm ent, home electric ap pli anc es, office equipment, information and com mu ni ca tion equipment) 2 these products are not intended for use in the following special conditions. be fore using the products, care ful ly check the effects on their quality and performance, an d determine whether or not they can be used. ?in liquid, such as water, oil, chemicals, or organic solvent ?in direct sunlight, outdoors, or in dust ?in salty air or air with a high concentration of corrosive gas, such as cl 2 , h 2 s, nh 3 , so 2 , or no 2 ?in an environment where these products cause dew condensation 2. handling 1 do not bring magnets or magnetized materials close to the product. the in uence of their magnetic eld can change the inductance value. 2 do not apply strong mechanical shocks by either dropping or collision with other parts. excessive schock can damage the part. 3. land pattern design 1 please refer to the recommended land pattern for each type shown on the datasheet. 2 avoid placing the chip inductor on any metal pattern ex cept the recommended land pattern because a drop of q and mutual conductance may occur. 3 in case of ow soldering, venting of soldering ux ga ses should be made for high density assemblies to get a good solder connection. 4 in case of re ow soldering, consider the layout becaus e taller components close to chip inductor tend to block thermal conduction. 4. mounting 1 in general, magnetic and electric characteristics of fe rrite cores can be changed by applying excessively strong force. placement force should not exceed 20 n. 2 do not bend or twist the pwb after mounting the part. 5. cleaning 1 do not use acid or alkali agents. some cleaning solvents may damage the part. con rm by testing the reliability in advance of mass production. 2 if ultrasonic cleaning is used, please con rm the reliability in advance. it is possible that combined resonance of component and pwb and cavitation can cause an abnormal vibration mode to exist causing damage. 6. caution about applying excessive current the rated current is de ned as the smaller value of ei ther the current value when the inductance drops 10 % down from the initial point or the cu rrent value when the average temperature of coil inside rises 20 c up from the initial point. do not operate pr oduct over the speci c max. current. safety precautions (common precautions for chip inductors) when using our products, no matter what sort of equipm ent they might be used for, be sure to make a written agreement on the specifications with us in advance. th e design and specifications in this catalog are subject to change without prior notice. ? do not use the products beyond the sp eci cations described in this catalog. this catalog explains the quality and performanc e of the products as individual components. be fore use, check and evaluate their operations when installed in your products. install the following systems for a failsafe design to ensure safety if these products are to be used in equip ment where a defect in these products may cause the loss of hu man life or other signi cant damage, such as damage to vehicles (au to mo bile, train, vessel), traffic lights, medi cal equipment, aerosp ace equipment, elec tric heating ap pli anc es, com bus tion/gas equipment, rotating equipment, and disaster/crime prevention equip ment. ? systems equipped with a protection circuit and a protection device ? systems equipped with a redundant circuit or other system to prevent an unsafe status in the event of a single fault package markings include the product number, quantity, and country of origin. in principle, the country of origin should be indicated in english. sep. 2012 01 1 6
|
